4 Air Conditioner Maintenance Tips

Buying the best air conditioning unit isn’t enough—you have to take good care of it to function optimally and last for a long time. How do you do this? Here are 4 air conditioner maintenance tips to consider:

Examine and set the thermostat

It’s as simple as it sounds. You need to check the thermostat to ensure it’s working properly and keeps your house at the right temperature. The beauty with this is you don’t need to hire an air conditioning repair services provider as you can do it by yourself.

Inspect the thermostat and ensure it’s working perfectly. If your AC is old and have an old mechanical thermostat, consider upgrading to a newer, smart programmable thermostat.

The smart thermostat allows you to set the temperature when you aren’t at home, so the AC works mildly, so expending little energy. You can also set the AC to start cooling the house 30 minutes before you get home, so by the time you are reaching there from work, you find a cool, comfortable house.

To maximize your savings, get a smart thermostat that monitors and reports your energy use. From the thermostat, you can set your daily schedules for cooling your house and test the results.

Clean or replace the air filters

The air filters are the heart of the air conditioner. When they are dirty and worn out, the air conditioner overworks, so you have a high energy bill at the end of the month. Dirty air filters also lead to a stuffy, uncomfortable house.

For a comfortable house and an optimally functioning air conditioner, clean the air filters at least once a month. You can do the cleaning by yourself or hire a professional to help out.

When doing the work by yourself, start by finding the location of the air filter. Depending on the brand and model of your unit, you can find the air filter:

  • Inside the blower compartment
  • In a slot on the side, bottom, or top of the AC
  • Behind the return air grille on the wall or ceiling in the central room of the house.

Inspect the air filters, and if dirty, clean them. If they are too dirty or worn out, replace them. When doing the replacement, use high-quality air filters. Avoid inexpensive fiberglass air filters as they won’t capture smaller particles such as bacteria, pollen, and viruses.

Ensure the AC is level

Many homeowners believe that once the AC is installed, it stays at the same position unless you remove it. Unfortunately, this isn’t the case. Due to weather elements and other factors, the AC changes its position from time to time.

One way to keep the AC in top condition is to ensure its level at all times. During your inspections, use a spirit level tool and ensure that it’s at the right place.

Why do you need to ensure the AC is level?

One of the reasons is because when you leave the air conditioner uneven, it continues to sink in a lopsided manner, and if you don’t fix it, it eventually tips over and disconnects from the refrigerant line, causing a leak that can be harmful to the environment and compromise your safety.

The air conditioner’s condenser pump doesn’t work properly when the AC isn’t level. Due to this, the lubricant pools in one part of the AC, and it doesn’t go where it should go. And as a result, you experience premature wearing out of the various AC components.

When you place the spirit level on top of the air conditioner and get an uneven result, you should prop up the unit with shims. You can do the work by yourself or hire AC repair services Chantilly to help out.

Leave a Reply

Your email address will not be published. Required fields are marked *